# About passing dynamic simulation to load test setup

**URL:** <https://community.gatling.io/t/about-passing-dynamic-simulation-to-load-test-setup/5518>\
**Category:** Gatling (Open-Source)\
**Created:** [March 1, 2020, 9:55am UTC](https://community.gatling.io/t/about-passing-dynamic-simulation-to-load-test-setup/5518 "2020-03-01T09:55:52Z")\
**Posts on this page:** 1\
**Page:** 1

<div class="post-metadata">

**Author:** ![Ajij\_Shaikh](https://avatars.discourse-cdn.com/v4/letter/a/858c86/32.png) [@Ajij\_Shaikh](https://community.gatling.io/u/Ajij_Shaikh)\
**Post date:** [March 1, 2020, 9:55am UTC](https://community.gatling.io/t/about-passing-dynamic-simulation-to-load-test-setup/5518/1 "2020-03-01T09:55:52Z")

</div>

Hi,

I am using gatling-maven and need to pass the dynamic simulation for load test the scenario. Currently I am passing the users and duration to the scenario and it works fine for me. But need the way where i can pass the simulation dynamically which we pass under setup, so that i don’t need to touch the code again and again for different type of simulation. Is that possible ?

Thanks,  
Ajij