# Since upgrade to v2.2.2 only 150 users get loaded when num of users to ramp-up is between 150 & 200

**URL:** <https://community.gatling.io/t/since-upgrade-to-v2-2-2-only-150-users-get-loaded-when-num-of-users-to-ramp-up-is-between-150-200/3313>\
**Category:** Gatling (Open-Source)\
**Created:** [October 10, 2016, 10:41am UTC](https://community.gatling.io/t/since-upgrade-to-v2-2-2-only-150-users-get-loaded-when-num-of-users-to-ramp-up-is-between-150-200/3313 "2016-10-10T10:41:37Z")\
**Posts on this page:** 1\
**Page:** 1

<div class="post-metadata">

**Author:** ![Ori\_Cohen1](https://avatars.discourse-cdn.com/v4/letter/o/d2c977/32.png) [@Ori\_Cohen1](https://community.gatling.io/u/Ori_Cohen1)\
**Post date:** [October 10, 2016, 10:41am UTC](https://community.gatling.io/t/since-upgrade-to-v2-2-2-only-150-users-get-loaded-when-num-of-users-to-ramp-up-is-between-150-200/3313/1 "2016-10-10T10:41:37Z")

</div>

Hello,

I use the following code to ram up the users:  
rampUsers(170).over(300 seconds)

What happens is that only 150 users get ramped-up by the end of the 5 minutes.  
In the log I see the following in the following sequence:  
[DEBUG] i.g.c.c.i.Injector - Injecting 1 users

[INFO] i.g.c.c.Controller - InjectionStopped

[DEBUG] i.g.c.c.i.Injector - Start user #150

No additional users are injected past this point.  
No errors appear and no other indication I was able to find of anything that failed.

When the rampUsers parameters is equal to or larger than 200 this problem does not occur.  
I also never encountered this issue before upgrading to v2.2.x

Please help

Thanks in advance  
Ori