# Test does not terminate

**URL:** <https://community.gatling.io/t/test-does-not-terminate/2509>\
**Category:** Gatling (Open-Source)\
**Created:** [September 3, 2015, 10:48am UTC](https://community.gatling.io/t/test-does-not-terminate/2509 "2015-09-03T10:48:35Z")\
**Posts on this page:** 6\
**Page:** 1

<div class="post-metadata">

**Author:** ![Henrik\_Sjostrom](https://avatars.discourse-cdn.com/v4/letter/h/bc8723/32.png) [@Henrik\_Sjostrom](https://community.gatling.io/u/Henrik_Sjostrom)\
**Post date:** [September 3, 2015, 10:48am UTC](https://community.gatling.io/t/test-does-not-terminate/2509/1 "2015-09-03T10:48:35Z")

</div>

When I run a load test there are a few users that don’t seem to complete.

The test is set to feed users into the system during an hour and each user takes \<2 minutes to complete the sequence.

However after having for 2 hours the test has the following status:

waiting: 0 / active: 55 / done:34504

And seems to be stuck there.

I’m not sure how to even begin to solve this problem. The test works when running with a single user.

How should I proceed in order to find the error?

---

<div class="post-metadata">

**Author:** ![slandelle](https://dub1.discourse-cdn.com/flex013/user_avatar/community.gatling.io/slandelle/32/4_2.png) [@slandelle](https://community.gatling.io/u/slandelle)\
**Post date:** [September 3, 2015, 10:54am UTC](https://community.gatling.io/t/test-does-not-terminate/2509/2 "2015-09-03T10:54:58Z")

</div>

Which version do you use?

---

<div class="post-metadata">

**Author:** ![Henrik\_Sjostrom](https://avatars.discourse-cdn.com/v4/letter/h/bc8723/32.png) [@Henrik\_Sjostrom](https://community.gatling.io/u/Henrik_Sjostrom)\
**Post date:** [September 3, 2015, 10:57am UTC](https://community.gatling.io/t/test-does-not-terminate/2509/3 "2015-09-03T10:57:23Z")

</div>

\<scala.version\>2.11.6\</scala.version\>

\<gatling.version\>2.2.0-M2\</gatling.version\>

\<gatling-plugin.version\>2.1.7\</gatling-plugin.version\>

\<scala-maven-plugin.version\>3.2.0\</scala-maven-plugin.version\>

---

<div class="post-metadata">

**Author:** ![slandelle](https://dub1.discourse-cdn.com/flex013/user_avatar/community.gatling.io/slandelle/32/4_2.png) [@slandelle](https://community.gatling.io/u/slandelle)\
**Post date:** [September 3, 2015, 11:11am UTC](https://community.gatling.io/t/test-does-not-terminate/2509/4 "2015-09-03T11:11:14Z")

</div>

Try with latest snapshot.  
If it still stalls, I’m afraid there’s nothing I can do without a reproducer.

---

<div class="post-metadata">

**Author:** ![Henrik\_Sjostrom](https://avatars.discourse-cdn.com/v4/letter/h/bc8723/32.png) [@Henrik\_Sjostrom](https://community.gatling.io/u/Henrik_Sjostrom)\
**Post date:** [September 3, 2015, 7:55pm UTC](https://community.gatling.io/t/test-does-not-terminate/2509/5 "2015-09-03T19:55:17Z")

</div>

That seemed to do the trick.

---

<div class="post-metadata">

**Author:** ![slandelle](https://dub1.discourse-cdn.com/flex013/user_avatar/community.gatling.io/slandelle/32/4_2.png) [@slandelle](https://community.gatling.io/u/slandelle)\
**Post date:** [September 3, 2015, 7:58pm UTC](https://community.gatling.io/t/test-does-not-terminate/2509/6 "2015-09-03T19:58:55Z")

</div>

Cool 🙂